Product available for pickup at Collingwood Store
Please Note: The base is die cut and to reduce waste base colour can vary and can’t be selected.
Advanced – Expert
Freestyle, All Mountain
Rocker in the tip and tail, camber underfoot.
The response of camber with the floatability of rocker. By combining camber and rocker you allow the board to be both responsive and floaty. The camber is between your feet as a spring keeping your contact points on the ground as you go in and out of turns allowing you to keep that edge hold longer. Once compressed the camber will accentuate the rocker and lift the nose out more allowing it to float.
Flex Rating: 7 – (1 Soft – 10 Stiff)
Poplar / Paulownia / Bamboo
Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.
Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.
Asymmetrical, True Twin
Asymmetrical Twin – Back in the day, asymmetrical boards meant you had to choose between a regular or goofy-stance board. Not only was that a nightmare for retailers, it didn’t suit anyone with a duck stance – which is everyone now. The Asym Twin applies a tighter, deeper heelside radial sidecut compared to the toe. In effect, balancing out the difference in a body’s natural tendency that we get with directional boards, allowing you to ride switch better than you ever have. Regular or goofy – it’s still a true twin. Just flip it around.
Asymmetrical MidBite – MidBite blends the response of a narrow waist width with the stability of wider nose and tail. The MidBite steps the outline of the board inward 1.5mm just inside the insert pack. This step remains (rather than bumping back out like the Basic) down about 1/3 the length of the sidecut until just inside the next insert pack. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to-edge response. Meanwhile, from your binding out to the end of the sidecut Yes. maintains a board width that is a stable platform for popping, spinning, and landing.
Binding Mount Pattern:
2 x 4 Inserts